RTW TouchControl 5 – Audio Over IP Monitor Contoller and Meter (with Software License Suite) RTW

Meet TouchControl 5, a Dante® based AoIP monitor controller with metering. Built on RTW’s long and proud legacy of making broadcast-ready monitor controllers, it features a 5″ intuitive touchscreen and a small footprint that preserves valuable space at your desktop. It even features RTW standard precision metering, including SPL, measured using the built-in microphone.

Features:

• Level Control of up to 24 (32) Audio Channels.
• User Configurable 5″ Touch Display.
• Integrated Microphone for Talkback and SPL Measurement.
• Studio Grade Microphone Input: 48 V Phantom Powered High-quality Microphone Input (XLR)
• Level Control with User Definable Key Functions: The level control encoder is used to control the level of selected audio channels. It can be pressed for mute or dim.
• Powerful Headphone Output: 1/4 inch Headphone output with the option of monitoring a user-defined downmix.
• Analog Speaker Output: 3.5mm speaker output with the option of monitoring a user defined downmix.
• 24 (32) Channels Level Metering: Up to 32 in various configurations channels can be metered.
• Easy Setup with Web-based Interface
• Dante® Audio over IP Networks.
• AES67 Compliant
• Calibrated Monitoring using internal microphone or manual set.
• Power over Ethernet: One cable for both audio and power (IEEE 802.3af compliant)
• Supports up to 24 bit, 96 kHz sample rate
• License structure that allows for attractive pricing
• Lockable Operation Mode: Fool-proof setup with access only to relevant controls. Prevents unintentional operation during showtime.

Plugged In
TouchControl 5 is born and raised as a network device. Therefore, it does not need many connections to the outside world, which is how we have been able to build a device with a very small footprint. The network port not only provides the audio channels, 32 in and 32 out, but also includes power. On top of that, you’ll also find a pristine 24 bit/96 kHz IO section.

Up Front
On the front of TouchControl 5, the integrated microphone feeds the SPL measurement, and it can also be used for talkback. The 5″ touchscreen is user configurable, as is the pushable rotary knob.

Surround Control Engine. Tried, Tested and Approved.
Tried, tested, and approved by many broadcast engineers around the world, you find the very same monitor control engine that you might know from our legacy surround monitor controllers.

The list is long, but let’s emphasize Downmix, Source A/B Compare, SPK Select, Calibrated Monitoring (using the internal microphone OR manual set), SPL Readout, Solo, Cut, Swap, Phase, Mono, Dim, Mute and Test Tone Generator.

Monitor Control from Stereo to 22.2
With support for up to 32 Dante® channels in and out, TouchControl 5 can easily handle channel configurations from stereo to 22.2.

Built for Dante® Audio over IP networks
TouchControl 5 is built for Dante® Audio over IP networks. It supports 32 channels in and out, up to 96 kHz. It is compliant with the AES67 Audio over IP standard.

Built-in Microphone for SPL or Talkback
TouchControl 5 features a built-in microphone that can be used for calibrated monitoring. Alternatively, it acts as a talkback microphone that can address any node in the audio network.

RTW Metering
As you know, metering plays a significant role in any RTW device, and so it does in the TouchControl 5. The PPM metering engine is taken from our high-end TouchMonitor meters, and you get a wealth of ways to tailor your own metering experience, including scales, color settings and more. True Peak metering is of course part of the metering story, as well as VU and ‘British PPM’.

Easy Setup with Web-based Interface
Being a true network device, the setup of TouchControl 5 is done through the network, using a standard web browser. This is where you make the overall settings, manage presets, handle licenses and more. You can also control the access to the device, including limiting operation to only certain features, avoiding un-intentional use during showtime.

TC5-MON Included Licenses:

• 4-channel Level Control (4 x In, 4 x Out)
• Simple Fader
• 2 x 2 Channels (Stereo) or 4 x 1 Channel (Mono) Control
• Basic PPM with TP and Phase

Monitor Control
(License SW32010)

• Downmix
• Source Select with A/B Compare
• Speaker Select
• Calibrated Monitoring using internal microphone or manual set
• SPL Readout
• Solo, Cut, Swap, Phase
• Mono, Dim, Mute
• Test Tone Generator
• Enables Line Out
• Enables Phones Out

Multichannel
(License SW32001)

• Enables the simultaneous use of up to 32 audio channels

Premium Metering
(License SW32006)

• PPM and TruePeak Metering
• PPM Scales, TouchMonitor Style
• VU
• British PPM