Warm Audio WA73EQ Single Channel Microphone Preamp with EQ Warm Audio

If there’s one style of preamp that professional engineers would unanimously agree has defined the tone of pop/rock records for decades, it would most definitely be the venerable ’73-style of mic pre. ’73-style preamps have been massively used in recording and live applications for many years and are still considered to be the “Holy Grail” of preamp choices today. The Warm Audio “WA73 Family” consists of single and dual channel ’73-style preamps (with & w/out EQ), that each pay careful homage to British audio history.

When Warm Audio decided to release the WA73-EQ it was imperative that it met vintage expectation in both design and performance. The tone and sweet character that vintage ’73-style mic preamps impart is so unique and familiar, that we had only the pure desire to release sonically accurate reproductions. After years of R&D, careful reverse-engineering, and countless hours of auditioning, the WA73-EQ has been born!

Features:

• Single Channel, Class A, ’73-style British Microphone Preamp with EQ
• UK made Carnhill Transformers
• UK made – Blore Edwards EQ dual-concentric switch potentiometers
• Hand Wired, hand assembled
• 80dB of gain – resistor stepped gain switch
• Fully discrete
• TONE button – Changes input transformer impedance for varying tone
• Polarity switch
• 48v phantom power
• Inductor based 3 band EQ
• Low Band Boost/Cut – 35, 60, 110, 220 Hz
• Mid Band Boost/Cut – 360, 700, 1600, 3200, 4800, 7200 Hz
• High Band Boost/Cut – 10, 12, 16 kHz
• Additional high band frequency EQ points added (compared to vintage 1073)
• 4 position inductor based hipass filter – 50, 80, 160, 300 Hz
• XLR mic inputs (front & back)
• Line level TRS input
• TS Send/Receive insert jacks
• XLR & TRS line level outputs
• Direct In, instrument input
• Output control
• Led level indication
• Freq response 20Hz – 20kHz +/-.5 dB
• 19″ rackable
• Internal IEC 115v/230v power inlet

The WA73-EQ is a “Desert Island” boutique preamp, but it can also be classified as a studio and live work-horse. Classic ’73-style preamps are known for being versatile tools that work with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA73-EQ equally shines on all types of microphones and sources including; vocals, acoustic/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain and a fully discrete Carnhill Transformer balanced signal path, there’s no recording, mixing or engineering task that the WA73-EQ can’t handle.

UK Custom Carnhill Transformers
Enthusiasts unequivocally get excited about the components used in classic ’73-style British preamps. The signal transformers are a common topic of conversation. Vintage units used various versions of transformers throughout the years, but the most coveted were the earliest versions. These are regarded as the most desirable choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful reproductions of these most coveted, early version transformers. Warm Audio have not yet heard a modern day ’73-style preamp sound as sweet and musical as does our WA73-EQ with these beautiful custom Transformers.

Hand Wired & Hand Assembled
Classic ’73-style preamps were often hand-wired and so is the WA73-EQ! Guru’s claim that a portion of the sought after classic British tone can be attributed to the hand-wired nature of the build. The WA73-EQ is hand-wired and hand assembled, including the pcb components that are all populated by hand.

Capacitors & Signal Path
An important part of the classic British circuits not often discussed are the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern ’73-style reproductions.

UK Blore Edwards Switch-Pots
An important part of classic British tone not often discussed are the different styles of capacitors and output transistor used in ’73-style circuits. We found it important to maintain integrity to early British designs by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern ’73-style preamps.